How to Extend Your Tire Lifespan: 3 Simple Methods

How to Extend Your Tire Lifespan: 3 Simple Methods

To make your tires last longer, Euromaster has listed what needs to be done for a longer tire lifespan with the recommendations it has prepared for car users. In our article, you will find 3 simple ways to extend your tire lifespan.

Accordingly, the right tire pressure, the right tire selection and regular tire controls each determines the length and quality of the service life. Tires, which are one of the most important parts of our cars, can have longer or shorter life depending on the usage.

Tire Lifespan
Tire Lifespan – Periodic Control
  • The right tire pressure
  • The correct choice of tire for the season
  • Periodic tire controls

are among the most important reasons that directly affect this process.

Tire physical structure, wear, tread depth, handling, and braking performance checks must be done at least once a year by a specialist service for the tires which are used for more than 5 years.

The most important determinant of a tire’s life is its tread depth. In this context, Michelin manufactures its tires to be suitable for use up to 1.6 mm tread depth in accordance with its technology.

Tire Lifespan
Tire Lifespan – Tire Depth

Therefore, Euromaster, tire, and vehicle maintenance service of Michelin and Michelin Group, recommends using Michelin tires up to 1.6 mm. Tires, which generally have a shelf life of 10 years from production, should not be used anymore even after the time has elapsed, even if the tread depth has not exceeded.

THE RIGHT TIRE PRESSURE IS VERY IMPORTANT

Tire Lifespan
Tire Lifespan – Tire Pressure

The only part of our cars that touch the ground is, tires. With the right tire pressure, we can enlarge or shrink the tire surface that touches the ground.

On average, the surface of each tire that touches the ground is the size of the palm of an adult man. When we put the four rubber contacting surfaces side by side, the total area is as much as an A4 paper.

If you apply an amount of air under the recommended PSI tire pressure to your tire, the surface that touches the ground slides further to the outside.

If you load air above the specified value, the middle part of the tire touches more places.

The high air pressure in the tires causes wears to be in the middle of the tread, while the low air pressure transmits this to the outer parts of the tread. So your tires do not melt homogeneously.

Both your car and your life can be endangered by the wrong tire pressure. In order to prevent irregular wear of the tires, it is recommended to check the vehicle preset settings and tire rotation every 10 thousand kilometers or at least once a year. Also, have your tires checked for air every 2 weeks and ensure that they are at the correct value.

you may also like to read

Ford Taunus

Ford Taunus (History and Best Models of Legendary Model)

Baris Han

Leave a Reply

Your email address will not be published. Required fields are marked *